Do you know how to prevent shipment of goods during shipment?

Do you know how to prevent shipment of goods during shipment? In fact, if you have a good method, it’s easy. And the failure of your pallet to be shipped has been greatly reduced.

When pallets arrive at their destination, a lot of pressure will be borne by them. All these pot holes, restrictions and sudden stops may result in a leak in the tray when the loading occurs. One of the main reasons you don’t want to ignore the damage is probably because of this. There are two things you can do here. If you do this, the failure of pallet cargo during shipment can be maintained.

First, work unitary is loaded correctly.

In fact, as we all know, this is your first defense. One of the most popular methods today is stretching the packaging. As we can see, if you pack the load better, you will have less damage to your load. The best thing for you is to use the machine.

However, when you’re effectively packing, it’s a rare thing to know if you want to tell. You can follow these rules because these rules can help you create one of the biggest survival opportunities.

Do you know the number of containers needed for the application? The effect of the pressure stretch film on the load is the containment force. For your load, if it doesn’t have enough containment, then we can see that it has an unnecessary risk of failure. Using a thin film cable to lock the load onto a tray is something you can do. If you’re going to roll the cable and apply it to the membrane underneath the tray, do you know what that does? It prevents the load from slipping off the tray. This is very helpful to protect the product. The cable placement is also very particular, it can make the fork from the Angle of the puncture, as a forklift or a tray, jack picks up the load.


 The strength of corrugated paper will be severely affected by high humidity.

The strength of corrugated paper will be severely affected by high humidity. In 95% humidity and 50% humidity, corrugated paper will fall 71%.

Thinner of corrugated paperboard and corrugated plate containing more recycled content will be the trend of we consider that the strength of the corrugated board and maximize performance need to be protected, which compared with at any time.

Make sure your box has a good start and the best start. At the same time, you have to make sure he stands up. So they’re “squares”, and we can see that they’re both horizontal and vertical angles of 90 degrees. Do you see those stacked boxes? They are vertically aligned on both sides, and 30% of the stack strength is enhanced.

You can click here, there are more cases of square. You can understand it better

This is a big problem.

When arriving at the distribution center, up to 11% of the unit load is impaired to a certain extent. On average, do you know what it is? It’s usually about 2 percent.

Some estimate that about $60 billion of ineffectual stretch packaging in consumer goods, food and beverage industries each year is being caused by the inability to sell products’ global value.

Here is an article about how to reduce this transport loss.

Here is a key solution plan

“What you find is deeper information, more precisely identifying the root of the problem, better making and executing corrective action plans is what you can accomplish.”

A root cause analysis is a key element of this strategy, which is revealed by the “where, what, and why” product damage. Throughout the supply chain, the stages are set up to influence, save, and improve.

Do you know what it’s like to monitor the packaging line operation and the tracking fees generated by the damage? They provide useful data for evaluating the effectiveness of your stretching packaging. Baseline data is created, do you know what the benefits are? It’s easy to make comparisons with the previous images. It is also easier to deal with search damage solutions.



Do you know how to reduce transport loss in the supply chain?

Do you know how to reduce transport loss in the supply chain?

We read a good article, its title as the “reduce packing damage to the supply chain”, – stretch packaging technology is very useful, it can ensure that your pallet load to the right place. Under the right conditions, if you use stretch wrapping technology, you can produce minimal transport damage.

Let’s take a look at some of the key insights of this article, which include:

The first one is stretching the packaging equipment, and the second is the effect of the film.

Do you know how to stretch the packing properly? One important factor that can be applied is whether it is a product support failure. First of all, we all know that the compatibility between the film and the stretching packaging machine needs to be ensured, which is important. Mandatory load measurement is another area that needs to be tested. Or, the amount of strength/force used to combine the product together needs to be tested. (in LBS).

It is very important to monitor whether the recommended pretension is adhered to during the process.

If there is not enough capacity, there is a greater risk for pallet load. Seal failure and damage are things that need to be prevented. Packaging each load is a very important thing. Pre-determined containment standards need to be met.

You need to fix the load to the tray. Or the keys loaded to the pallet need to be created, which are the key elements of an effective stretch wrapper. Any long or drag film tail needs to be eliminated. Load keeping on the tray also needs to be ensured.

You can look at our recent web webinars and stretch your tray loads in the best possible way.

Wrinkles are affected by heat and humidity.

In the first 30 days of storage, the strength of corrugated paper has decreased, and in general, it will fall by 40%.


Stretch Wrapping


But it’s also invisible, which is the same thing as the cockroaches hiding behind your walls.

The insidious danger of small damage.

When the news of major damage is widely circulated, less visible damage is not heard. A cereal box with a broken corner or a concave canned vegetable is its form. When was the last time you reached for a box of cereal and you saw a corner smashed? Do you remember? You must have considered buying it again and again. Maybe a competitive brand will be chosen by you.

We all know that if an imperfect product gets into store shelves, it can be damaged for brand loyalty. Sometimes, do you know how to deal with these damaged products? These damaged products must be sold at a discount. So the profits have been greatly reduced.

In fact, this type of damage is not noticeable. In general, a major catastrophe will not happen. However, this does not mean that the damage did not happen. At the same time, it has a big impact.

As we mentioned above, your reputation is one of the costs of this damage. One of the hardest things to measure is this. But you can feel its ripples. Of course, a box of damaged cereal won’t damage the brand’s reputation. But, over time, do you know what’s going to happen? A history and injury pattern can happen.

How are products sold? Is it for sale at a discount? Similarly, if only once, it would not have a significant impact on profits. However, if it becomes a regular event, we can see that it can have a measurable effect.

How should big and small damages be resolved?

The cockroach is always there, and it may always be there. They also don’t need to be so for transport and pallet damage. Because when we do something, we have tools.


Do you see any damage for the products and trays?

pallet wrapping, stretch film

Do you see any damage to the products and trays?

When was the last time you saw a cockroach crawling out of your foot or freezer? Was it last month? Was it last year? In fact, it’s more likely that you see an image in a horror movie, or a few images. Usually, we see very little of them. In fact, we all find that they are invisible and that they hide behind the soles of their feet or under the refrigerator. Then they waited for us to go to sleep. Then they can come out. We don’t want to admit it, but it’s always there.

Now, you can consider the transportation loss. As we all know, it doesn’t happen very often. But every time you load a tray, we can see that there’s always a risk of loss.

Do you know any visible damage here?

You know that a catastrophic event was something we were sure of, and a truck was rejected by the customer. That may happen when a retailer opens a truck door, but the retailer finds a pile of broken glass bottles. Or the broken farm tray they found. You can see that this is visible damage. This is a cockroach hazard. They rush past your feet. This is the harm you hear, but in fact, you can prevent it from happening.

Generally speaking, because of this damage, the damage will prompt the company to re-evaluate their stretching packaging strategy. Sometimes, we can see that it will lead to new packaging standards being set up, or people will buy new machines.

When large and costly losses occur, there is usually a significant change in the packaging. Because bigger, more expensive losses in the future need to be prevented.



Preparation — do you know what an important concept in life is? It’s just stretching the packaging.

The key to success is preparation. When you’re ready to do your homework, you’ll get half the effort. The packaging of any type of stretch is no exception. Just like before painting a wall, you also need to do the preparation work, which is a principle. The first step in building a safe boat is to prepare your load on a tray. But here, you have something to remember:

The appropriate size tray needs to be used. Do you know what the edge of the load should look like? It shouldn’t be more than two inches, either from the edge of the panel or from the outside. If the load exceeds the load. The damage is very easy to happen. Because it’s handled. If there is too much of a load, we all know that it will be very difficult to keep it safe. At the same time, the corner of the pallet exposure can often cause problems, such as the rupture of the membrane. So the situation where the operator reduces the packaging force will appear. It’s the butterfly effect. Broken trays should be freed. The cracks in the tray are also dangerous, and it is prone to sharp edges, and the sharp edges can puncture the film. Stretching the wrapper operator does not like film rest. As already noted, reducing packaging power is what they tend to be. Because it’s our purpose to reduce or prevent them. The stack is strong. It is more prone to failure for low stack loads. Do you know how much of the accumulated strength of those boxes that don’t have a vertical alignment? In general, it loses 30% of its accumulated strength. You’re doing their job that needs to be made sure that your product needs to be protected.

One of the biggest cost drivers is the damage to your product, when the load arrives at your destination from your dock.






Stretch Film

That means that all the angles have to be 90 degrees. Do you know what it does? It prevents the product from moving and damaging immediately during packaging.

As time passes, we know that this is important for the packaging process. As we can see, the box is packed and closed at a right Angle. If the closed edges of the box are not completely vertical, we can see that the corners of the boxes do not lean against each other, which reduces the load strength of the tray. In the meantime, the case of the box collapse will also occur. If this happens frequently, it will have a bad effect!

Loading tray.

Do you know what these boxes should look like? It must be stacked correctly on the tray, because the maximum load intensity is its purpose. We can see that everything must be in the trays’ footprint: do you know what it means to have no boxes sticking out? It means there are no broken corners. If in the top, middle and bottom of the tray, enough sealing force on it, so, in the course of carriage, for your valuable product shell, it can get the maximum protection.

How to properly load or stretch your tray, you know? 3 keys to effective stretch wrapping can be checked. How to fix the load of the pallet in the speed of the package is also needed to learn.

Packaging is essential.

When these security cases arrive at distribution centers and stores, we can see that they look good. Meanwhile, the goods were not damaged. Underestimating the importance of packaging is something we shouldn’t do. Because packing is special and important for transportation. What we know very well is the packaging, which will help you to get from a to B products without damage is what we expect.


Do you know the best way to reduce product damage?

Do you know the best way to reduce product damage? If you still don’t know, we can also know that the best way to reduce product damage is to use the right stretch wrap properly.

Do you know what the easiest, fastest, cheapest way to improve on these causes is? After our verification, stretching packaging is the best method. If that’s not enough, the more effective stretch packaging is also “low-hanging fruit” or “Band-Aid,” which is more effective in stretching and packaging to mitigate or compensate for other major damage methods. Therefore, you should make an effective stretch package for your product!

If you’re shipping a stretched-out tray, unless you have evidence to the contrary, do you know what your success rate is? In general, it is no more than 99.5%. Even if you’re up to 99.5%, that’s not good enough. Usually, you lose a lot of money on average, about $50 to $500 per truck, and you need to keep your money on the table.

In other words, a $100 million company loses half a million dollars a year, but we all know that these losses are avoidable transportation losses. To make up for this loss is our goal. How many more products will it need to sell for this purpose?

Reducing transport loss by 50% is our aim. For the sake of

A waste of money can’t happen again. In fact, there are low-hanging fruits. What are your criteria? It doesn’t have to be 50 percent. If you have lean processes and principles, typically 50% or more loss and waste will be reduced.

You can use a more effective stretch wrap and take the first step at the same time, making your shipping losses greatly reduced. Now you can start to recover the lost dollars. It’s very helpful to increase your profits.






Product Damage

Transport damage reduced sales by 5%!

However, another mode of transportation is a form of transportation that is unacceptable. Do you know what the grocery manufacturers association and the food marketing association tell us? For example, for example, transportation losses in food, beverage and consumer goods industries, such as losses incurred in factories and outlets. These losses are 5% of the total sales. As we can see, the losses are huge. If you can figure out how to avoid these losses, people’s costs will be reduced and profits will go up.

Do you know what the bad news is? That’s the equivalent of a loss of $1 billion a year in the United States, which is bad news. But there is good news here, and the good news is that the damage can be avoided. So what can be done to prevent this loss? We can look at that.

  • Reducing transport losses is standard practice.

We need to place the tray table and seat back in an upright position, and the thing you need to do when we’re sitting is to fasten our seatbelts. In flight, we can’t move in the cabin. Almost all of their transportation losses have been eliminated by airlines, which is a good result.

Do you know how different damage problems arise? It is made up of the products of the transport tray. But it’s like an airplane passenger injury, and if you use standard procedures, you can avoid these problems.

Do you know the main reason for the damage of pallet loading and transportation?

You can create package instability by reducing the material in the main package. Loads that are not suitable for their pallets need to be built. Using a tray to make loose or irregular loads is something you need to use. But there is a gap between the damage caused by the loading of the truck and the damage caused by the load. Universal poverty stretch packaging.




Stretch Wrapping

Use your rope tied to your load on its tray is something you need to do, you need to try to keep it a high enough level, if so, you can use a pallet fork fork or fork fork to pass. In fact, this kind of hand-made rope is not as effective as the reel line, and the roll line is the preferred rope. But its effect is better than using a regular film net to pull it down to the bottom of the tray.

Rule # 3 – rule three is you need to sew your tail!

No negatives, thank you. We can see that ugliness is their fault, but not only that, they can also cause the stretch film to contract or be suspended or damaged during handling. This is a very bad influence. The tail of the film is easy to do. Remember, if the customer sees the goods damaged or unusable, there is no doubt that the customer will be unhappy.

Part of your brand is your load.

The packing is very good. If it’s safe, they look good and safe. If you look alone, it doesn’t guarantee successful shipment, but at least we all know it’s a good place to start. So, if your goods don’t look good, you must consider them before shipping, and don’t repackage them again. It would be normal if you repackaged the goods.

At the end of the day, we can see tightly wrapped goods, a lot of rotation and bonding on the tray. The key to successful L delivery is the absence of the hanging or dragging film tail.

If you don’t need an opportunity, you don’t have to take it.

Whether you pack five times a day, or 500 or even 5,000 times, we can conclude that the principle of stretching is the same. Its purpose is to avoid harm. Make sure your load is safe, and you can check your stretching wrap practice, which is very necessary. For the 10 steps of La, you can do specific learning. If you have more effective stretch wrap, then we can see that the damage can be greatly reduced.